To unlock the full potential of many effects and to simplify operation, you need an aux switch.
The Aux-Tap Triple can be configured in various ways so that it is compatible with (almost) every aux-capable effect. It has very high-quality footswitches with no clicking noise and a specially developed aluminum enclosure.
The Last Aux Switch You’ll Ever Need!
The Aux-Tap Triple fits on every pedalboard and is easy to operate thanks to the sufficient distance and slight incline of the footswitches.
The side-mounted sockets allow other effects to be placed directly behind the Aux-Tap Triple. The sockets are slightly offset inwards in the enclosure - so the jack plugs do not protrude far. With an enclosure height of 23 - 28 mm, it is flatter than (almost) all effects. Perfect for the front row on the pedalboard!
Works with (almost) any aux-able effect
The mini switches on the back can be used to switch between four aux circuits.
Standard
The most common aux circuit that the majority of manufacturers use with their effects. The footswitches connect tip, ring and tip + ring to sleeve.
Compatible with Eventide, Digitech, Electro Harmonix, Morningstar and many other manufacturers - in the "Tap & Aux Switches" category you will find a table with compatible effects.
Strymon
Identical circuit as a Strymon MultiSwitch - compatible with Mobius, BigSky, BigSky MX and TimeLine.
The functions of the individual footswitches depend on the mode selected on the effect:
| Mode |
Footswitch |
| 1 |
2 |
3 |
| Bank |
Bank ▼ |
Bank ▲ |
A → B → C |
| Preset |
Preset ▼ |
Preset ▲ |
Bypass |
| Tap |
Preset ▼ |
Preset ▲ |
Tap Tempo |
| Looper * |
Rec / Dub |
Stop |
Play |
| Reverse |
Undo |
Half Speed |
* Only available with TimeLine. Hold down the TimeLine's Tap switch to access the second line's functions.
Red Panda
Compatible with Red Panda Tensor, Bitmap 2, Context 2, Particle 2 and Raster 2.
Miniswitch 4 sets whether the three footswitches correspond to footswitches A, B & C or A, D & C on the Red Panda Remote 4. Depending on the connected Red Panda effect, there are different modes of operation (see the original manual).
Meris
Easy saving of presets (same functionality as the Meris Preset Switch, only with 3 presets).
3 = 2 + 1
The Aux-Tap Triple is normally connected to a compatible effect via the socket on the left side using a stereo cable (TRS) - the socket on the right side is not in use.
However, if a mono cable (TS) is connected to the socket on the right side, the right footswitch of the Aux-Tap Triple splits off and can be used as a separate footswitch (tip to sleeve) with many effects - e.g. as a tap tempo switch.
The functionality of the left two footswitches does not change, but they can now also be used excellently with effects that only support two external footswitches (e.g. from Line 6, Kemper and other manufacturers).
| Power supply necessary: |
No |
| Dimensions (L x W x H): |
44 x 170 x 40 mm |
Product safety information
Manufacturer information:
Constantin Eckstein
Kreuzgasse 11
72581 Dettingen an der Erms, Deutschland
info@looperwerk.de